Ryobi RY43006 Chainsaw User Manual


 
3
GENERAL SAFETY RULES
READ ALL INSTRUCTIONS
BASIC SAFETY PRECAUTIONS
n Do not start cutting until you have a clear work area, se-
cure footing, and a planned retreat path from the falling
tree. Cluttered areas invite accidents.
n Keep ALL children, bystanders, visitors, and animals out
of the work area while starting or cutting with the chain
saw.
n Do not operate power tools in explosive atmospheres,
such as in the presence of flammable liquids, gases, or
dust. Power tools create sparks which may ignite the dust
or fumes.
n
When operating a power tool outside, use an outdoor
extension cord marked “W-A” or “W”. These cords are rated
for outdoor use and reduce the risk of electric shock.
n Polarized Plugs. To reduce the risk of electric shock,
this tool has a polarized plug (one blade is wider than
the other). This plug will fit in a polarized outlet only one
way. If the plug does not fit fully in the outlet, reverse the
plug. If it still does not fit, contact a qualified electrician
to install the proper outlet. Do not change the plug in any
way.
n Make sure your extension cord is in good condition. When
using an extension cord, be sure to use one heavy enough
to carry the current your product will draw. A wire gauge
size (A.W.G.) of at least 12 is recommended for an exten-
sion cord 50 feet or less in length. A cord exceeding 100
feet is not recommended. If in doubt, use the next heavier
gauge. The smaller the gauge number, the heavier the
cord. An undersized cord will cause a drop in line voltage
resulting in loss of power and overheating.
n Inspect extension cords periodically and, if damaged,
have repaired by a licensed electrician. Constantly stay
aware of cord location. Following this rule will reduce the
risk of electric shock or fire.
n Wear snug fitting clothing. Always wear heavy, long pants,
overalls, jeans or chaps made of cut resistant material or
ones that contain cut resistant inserts. Wear non-slip safety
footwear. Wear non-slip heavy duty gloves to improve
your grip and to protect your hands. Do not wear jewelry,
WARNING:
Do not attempt to operate this unit until you have read
thoroughly and understand completely all instructions,
safety information, etc. contained in this manual. Failure
to comply can result in accidents involving fire, electric
shock, or serious personal injury.
short pants, sandals, or go barefoot. Do not wear loose
fitting clothing, which could be drawn into the motor or
catch the chain or underbrush. Secure hair so it is above
shoulder level.
n Wear eye protection which is marked to comply with ANSI
Z87.1 as well as hearing and head protection when oper-
ating this equipment.
n Always be aware of what you are doing when using the
chain saw. Use common sense. Do not operate the chain
saw when you are tired, ill, or under the influence of al-
cohol, drugs, or medication.
n Do not expose the chain saw to rain.
n Do not use the chain saw in damp or wet locations.
n Always be aware of extension cord while operating chain
saw. Take precautions to avoid tripping over cord. Keep
cord away from chain and operator at all times. Never carry
saw by the cord or pull it to disconnect from receptacle.
Keep cord from oil and sharp edges.
n Stay alert and pay attention to what you are doing. Use
common sense when using this unit.
n Keep all parts of your body away from the saw chain
when the unit is running.
n Always carry the chain saw by the front handle with the
unit unplugged and the guide bar and saw chain positioned
to the rear. When transporting your chain saw, use the
appropriate guide bar scabbard.
n Never let anyone use your chain saw who has not received
adequate instructions in its proper use. This applies to
rentals as well as privately owned saws.
n Before you start the unit, make sure the saw chain is not
contacting any object.
n Stop the chain saw before setting it down.
n To avoid accidental starting, never carry the unit with your
finger on the switch trigger.
n Maintain the unit with care. Keep the cutting edge sharp
and clean for best performance and to reduce the risk
of injury. Follow instructions for lubricating and changing
accessories.
n Keep handles dry, clean, and free of oil and grease.
n Do not operate a chain saw with one hand! Use a firm grip
with thumbs and fingers encircling the chain saw handles.
Serious injury to the operator, helpers, bystanders, or any
combination of these persons may result from one-handed
operation. A chain saw is intended for two-handed use.