Filter
Top Products
26
PROBLEM CAUSE SOLUTION
Bar and chain running hot
and smoking.
Motor runs, but chain is not
rotating.
1. Check chain tension for over
tight condition
2. Chain oil tank empty.
1. Chain tension too tight.
2. Check guide bar and chain
assembly.
3. Check guide bar and chain
for damage.
1. Tension chain. Refer to Chain Tension
earlier in this manual.
2. Check oil tank.
1. Retension chain, Refer to Chain Tension
earlier in this manual.
2. Refer to Assembling the Bar and Chain
earlier in this manual.
3. Inspect guide bar and chain for
damage.
TROUBLESHOOTING
CAL
L
1-800-860-4050
www
.ryobitools.com
CALL us fIRsT
For any questions about operating or maintaining your product,
call the Ryobi® Help Line!
Your product has been fully tested prior to shipment to ensure
your complete satisfaction.