Filter
Top Products
Drill a pilot hole (using 1/8" drill bit) in front lower corner
at location indicated by screw target.
Note: This pilot hole is to be drilled through both walls.
b.
3.4 Wall Panel G Installation
Align the lap joint between Repeat Left Side (C) and
Front Left Side (G).
c.
Using a screwdriver, punch out the screw holes on the
top of Front Left Side (G) 2 places.
a.
G
G
Screw Holes
1
2
C
G
OVERHEAD VIEW
DETAIL 3-1_B
SCALE 1/1
DETAIL
3-3_E
SCALE 1/1
DETAIL
3-3_B
SCALE 1/1
DETAIL
3-4_B AND 3-5_B
SCALE 1/1
DETAIL
3-6_B AND 3-7_B
SCALE 1/1
C
G
G