Filter
Top Products
Page x of y
Rev 02 05/04/05
After pressing “B”, should “ERROR” appear in the upper row, followed by five (5) beeps, you have
exceeded the timer’s measuring capability of 1000 mph/kph. When this occurs, the Lap Time continues to
run. To correct the error, simply press “C” to return to the previously recorded lap. Then press “B” to take
the appropriate lap readings.
Upon completion of the event, or to stop the Speed Timer at any time, press “A”. “STOP” indicator
appears and one (1) is added to the Lap Counter.
Then, press “B” once, to display the accumulated time and again to reset to all zeros.
AVERAGE, MAXIMUM and MEMORY Functions
The MAXIMUM SPEED/FASTEST LAP reading can be displayed at any time, by pressing “D”. The
“MAX” indicator will appear, as will the lap number, speed and time of the fastest lap. To return to any
previous function, press “C” or the SC-554 will automatically do so after 15 seconds.
The AVERAGE SPEED and TIME of multiple laps, up to 999, can be computed and displayed at any time,
by pressing “D”, again. “AVG” indicator appears and the average lap time will appear in the upper row of
the display, along with the total number of laps completed.
30 MEMORY RECALL of lap speed, time and number can be displayed at any time, up through 999 laps,
by pressing “F”. Recall “RCL” indicator appears. Holding “F” down, will cause the previous readings to
be displayed at a rate of one per second.
If the “RUN” indicator appears, you may take another Speed reading at any time, by pressing “B”. You
may also instantly return to the last previous reading at any time by pressing “C”.
The memory recall operation will review previous readings in ascending “UP” or descending “DN” order,
depending on the option selected.
NOTES:
(1) The SPEED TIMER will not operate unless a distance has been entered.
(2) The SC-554 will measure up to 24 hours or 999 laps.
LIMITED WARRANTY
OUR BASIC POLICY
Marshall-Browning International Corporation (MBI Corp.) warrants to the original owner, this quartz digital liquid display timepiece
(excluding battery, lens, band, or strap) for the period of one year from the original purchase date. This limited warranty is given by
MBI Corp. and not by the dealer from whom the timepiece was purchased.
THE WARRANTY PROCESS - WHAT IS COVERED BY THE WARRANTY
If the timepiece develops a manufacturing defect within the one-year limited warranty period, it will be either repaired or replaced (at
MBI Corp.'s option) with a timepiece of equal or greater value, providing the original owner submits the following:
1. Proof of purchase, i.e. a validated store receipt showing date of purchase.
2. A check or money order (no cash, please) in the amount of $6.50 to cover the cost of
shipping and handling.
WHAT IS NOT COVERED BY THE WARRANTY
A. MBI Corp. will not repair defects or damages caused by or showing evidence of:
1. Improper or unauthorized service.
2. Misuse, tampering, abuse, or mistreatment of the timepiece.
3. Damage to the case or visible cracking of the lens.
4. Moisture damage, if the product is a non-water-resistant timepiece.
B. If we find that the battery is the cause of the defect, MBI Corp. reserves the right to charge you ($6.50) for a new
replacement.
MBI Corp. is not liable for incidental or consequential damages. Some states do not allow the exclusion or limitation of incidental or
consequential damages, so the above limitation may not apply to you.
YOUR RIGHTS UNDER IMPLIED WARRANTIES AND STATE LAW.
MBI Corp. limits the duration of any warranty implied by state law, including the implied warranty of merchantability, to one year
from the date of original purchase. Some states do not allow limitations on how long an implied warranty lasts, so the above