Filter
Top Products
OPERATION
RHD 02/11 Operation Section 4-18
© 2011 Alamo Group Inc.
OPERATION
• Inspect the condition of the drive belts.
• Ensure the slip clutch (rear mower section only)
is properly adjusted and the friction plates are
not frozen together. Reference the
Maintenance Section for proper slip clutch
maintenance.
• Ensure the slop clutch shield and drive belts
shields are in place and in good repair.
• Ensure the tractor PTO master shield is in
place, lowered and in good condition.
OPS-F- 0016
• Inspect oil level in gearbox and replenish if
needed. A low oil level is a warning sign that
the gearbox may be cracked or its seal is
damaged and needs to be replaced.
• Perform scheduled lubrication as specified in
the maintenance section. OPS-F-0017
• Inspect cutter knives and knife pins for
looseness and excessive wear. Make sure the
mower is securely blocked up before crawling
beneath. Replace damaged, worn, and missing
knives as complete sets to maintain cuttershaft
balance.
• Remove any grass or other debris which may
be wrapped around the cuttershafts.
• Inspect the condition of deck skid shoes and
hardware. OPS-F- 0007