Filter
Top Products
OPERATION
FN20/FN14 NITRO 02/10 Operation Section 4-2
© 2010 Alamo Group Inc.
OPERATION
RHINO FN14/FN20 NITRO ROTARY MOWER
OPERATION INSTRUCTIONS
Rhino FN14/FN20 NITRO rotary mowers are manufactured with quality material by skilled workers. These
mowers are designed to cut grass, weeds, small brush and other vegetative material up to 4-1/2” diameter in
areas such as pastures and along highway right-of-ways. The mower is equipped with protective deflectors
and/or chain guards to prevent objects being thrown from the mower by the blades, however, no shielding is
100% effective. All shields, guards, deflectors, and chains equipped on the unit must be maintained on the
mower in good operational condition.
It is the operator’s responsibility to be knowledgeable of all potential operating hazards and to take every
reasonable precaution to ensure oneself, others, animals, and property are not injured or damaged by the
mower, tractor, or a thrown object. Do not operate the mower if passersby, pets, livestock, or property are
within 300 feet of the unit.
This section of the Operator’s Manual is designed to familiarize, instruct, and educate safe and proper mower
use to the operator. Pictures contained in this section are intended to be used as a visual aid to assist in
explaining the operation of a rotary mower and are not necessarily of a FN14/FN20 NITRO cutter. Some
pictures may show shields removed for purposes of clarity. NEVER OPERATE this implement without all
shields in place and in good operational condition. The operator must be familiar with the mower and tractor
operation and all associated safety practices before operating the mower and tractor. Proper operation of the
mower, as detailed in this manual, will help ensure years of safe and satisfactory use of the mower
.IMPORTANT: To avoid mower damage, retorque all bolts after the first 10 hours of operation. Refer to the
Torque Chart at the end of the Maintenance Section to ensure bolts are properly tightened.
READ AND UNDERSTAND THE ENTIRE OPERATING INSTRUCTIONS AND SAFETY SECTION OF THIS
MANUAL AND THE TRACTOR MANUAL BEFORE ATTEMPTING TO USE THE TRACTOR AND
IMPLEMENT. If you do not understand any of the instructions, contact your nearest authorized dealer for a
full explanation. Pay close attention to all safety signs and safety messages contained in this manual and
those affixed to the implement and tractor. OPS-U- 0001
READ, UNDERSTAND, and FOLLOW the following Safety Messages. Serious injury or
death may occur unless care is taken to follow the warnings and instructions stated in the
Safety Messages. Always use good common sense to avoid hazards.
(SG-2)
Si no lee ingles, pida ayuda a alguien que si lo lea para que le traduzca las
medidas de seguridad.
(SG-3)