Filter
Top Products
18
Left key (green)
• Enters a menu.
• Confirms and applies settings.
•
Performs the function indicated by the text above it in the LCD (eg, ’enter’,
’change’).
Right key (red)
• Performs the function indicated by the text above it in the LCD (eg, ’exit’).
• Cancels operations.
• Extended hold: exits to the top level of the menu.
QuickView key
Takes you immediately to the Treatment screens, with information on your
current therapy. See “Treatment Screens” on page 24.
Alarm LEDs and Alarm mute
The Alarm LEDs are lights that indicate that an alarm has been triggered. Alarms
can be muted by pressing the Alarm mute key once. The Alarm LEDs will
remain lit for as long as the alarm is being triggered. See “Alarms” on page 25.
Adjusting Settings
By using the Left, Right and Up/Down keys you can adjust some aspects of
your treatment. The settings can be seen in the LCD display.
To change a setting, press the Up/Down key until you arrive at the menu you
require.
• Press the Left key to enter the menu, then use the Up/Down key again to
scroll through the options.
• Once you find the option you require press the Left key to select the function
that is displayed in the bottom left of the screen eg, ’change’, ’yes’.
• Use the Up/Down key to alter the parameters and press the Left key when
you have the setting you require.
• Press the Right key to exit from the menu.
228234 VPAP Adapt SV User Guide USA Eng.book Page 18 Monday, October 13, 2008 2:15 PM