Remington Power Tools M30016AW Chainsaw User Manual


 
20
www.remingtonpowertools.com
STORAGE
If storing saw for more than 30 days, follow steps
below.
1. Drain oil tank after each use.
2. Remove and clean guide bar and chain. Clean
guide bar and chain by soaking in petroleum
based solvent or mild soap and water mix-
ture.
3. Dry guide bar and chain.
4. Place chain in container filled with oil. This
will prevent rust.
5. Wipe a thin coating of oil over surface of guide
bar.
6. Wipe off outside of saw body. Do this with soft
cloth dampened with a mild soap and water
mixture.
7. Store chain saw
in a high or locked place, out of children’s
reach
• in a dry place
WARNING: Use only replacement
parts and accessories described in
this manual. Use of other parts or ac-
cessories could damage saw or injure
operator.
REPLACEMENT PARTS AND
ACCESSORIES
For original replacement parts and accessories,
contact your nearest Authorized Dealer or Au-
thorized Service Center for this product. If they
can not supply the part or accessory, contact your
nearest Parts Central listed on page 74. Each Au-
thorized Dealer, Authorized Service Center, and
Parts Central is independently owned and oper-
ated. You may also order parts from the "Online
Outlet" at www.remingtonpowertools.com.
See pages 72 through 73 for an Illustrated Parts
List.
If you need additional referral information, contact
our Technical Service Department (see Technical
Service).
In Canada call 1-800-561-3372 for parts and service
information.
REPAIR SERVICE
Note: Only use original replacement parts. This
will protect your warranty coverage for parts
replaced under warranty.
Each Authorized Service Center is independently
owned and operated.
Warranty Service
If product requires warranty service, return it to
nearest Authorized Service Center. You must show
proof of purchase. If faulty materials or workmanship
caused damage, we will repair or replace product
without charge. Note: Normal wear, misuse, abuse,
neglect, or accidental damage is not covered under
warranty.
Non-Warranty Service
If product requires service, return it to nearest
Authorized Service Center. Repairs will be billed
to you at regular repair list prices.
For additional Service Center or warranty informa-
tion, call 1-800-626-2237 or visit our Technical
Service web site at www.remingtonpowertools.
com.
Replacement saw chains may be available at your
local hardware or home improvement store.
The following list gives the specifi cations for
replacement chains.
All chains will be .050 gauge, 3/8 pitch.
10" chains have 42 drive links
12" chains have 48 drive links
14" chains have 52 drive links
16" chains have 58 drive links
You may also order the replacement saw chains
from the "Online Outlet" at www.remington-
powertools.com using the part number listed in
the illustrated parts list on pages 72-73 of this
manual.
REPLACEMENT CHAINS