Filter
Top Products
ENGLISH
5
www.remingtonpowertools.com
DANGER:
RISK OF CUT: Keep hands away
from blades at all times. Keep
both hands on handle areas
when tool is on. Do not attempt
to remove cut material nor hold
material to be cut when blades
are moving. Do not grasp the
exposed cutting blades or cutting
edges when picking up or holding
the Shear/Shrubber.
Blades coast after turn off.
CAUTION:
IMPORTANT SAFETY INFORMATION
1. Stay alert and use common sense. A mo-
ment of inattention while operating power
tools may result in serious or fatal injury.
2. Keep hands and feet clear of cutting area.
3. The environment allows for good footing
and balance, do not overreach.
4. Do not force the tool. Using the tool be-
yond its design intent increases likelihood
of injury.
5. Blades should not contact anything except
for that which it is intended and designed
to cut.
MAINTENANCE AND STORAGE
Proper maintenance and care increases the life
of the tool and reduces risk of injury. Maintain
tool by ensuring the following:
• Keep tool housing dry, clean and free
of slick substances such as grease
and oil.
• Clean cutting blades after each use.
• Apply a light coat of motor oil to the
cutter blades.
• Store idle tools indoors in a dry location
and out of a child's accessibility when
not in use.
UNPACKING
1. Remove tool and all other items from
box.
2. Check all items for shipping damage. If you
fi nd any damage or if any parts are missing,
call DESA Power Tools Technical Service,
1-800-626-2237.
WHILE OPERATING SHEARS
Note: Normal wear to blades or tool is not
covered under the warranty. Damage due to
accidental or intentional abuse is not covered
under the warranty.
Note: If there is damage to the tool, refer to
the warranty. Contact Technical Service at
1-800-626-2237 for any questions.
Note: At the time of this writing, there are
no serviceable or replaceable parts. Please
contact technical services for any change to
this status.
SAVE THESE
INSTRUCTIONS.
BLADES ARE SHARP. WHEN
IT IT NECESSARY TO HANDLE
BLADES, HANDLE THEM WITH
CARE!
WARNING:
Do not combine any other blades
or parts to the tool not specifi cally
designed for the tool. Any other
accessory or attachment increases
the risk of injury.
WARNING: