Filter
Top Products
18
www.remingtonpowertools.com
STORAGE
If storing saw for more than 30 days, follow steps below.
1. Drain oil tank after each use.
2. Remove and clean guide bar and chain. Clean
guide bar and chain by soaking in petroleum
based solvent or mild soap and water mixture.
3. Dry guide bar and chain.
4. Place chain in container filled with oil. This will
prevent rust.
5. Wipe a thin coating of oil over surface of guide bar.
6. Wipe off outside of saw body. Do this with soft cloth
dampened with a mild soap and water mixture.
7. Store chain saw
• in a high or locked place, out of children’s reach
• in a dry place
• in a carrying case or with scabbard over guide bar
TECHNICAL SERVICE
You may have further questions about assembling,
operating, or maintaining this product. If so, you
can visit our Technical Service web site at www.
remingtonpowertools.com or contact our Techni-
cal Service Department at 1-800-626-2237 (English
Only). You may also write to:
DESA Power Tools
ATTN: Technical Service
P.O. Box 90004
Bowling Green, KY 42102-9004
When contacting DESA Power Tools, have ready
• Your Name
• Your Address
• Your Phone Number
• Model Number of Product
• Date of Purchase (Include copy of receipt for writ-
ten requests).
WARNING: Use only replacement
parts and accessories described in this
manual. Use of other parts or accessories
could damage saw or injure operator.
REPLACEMENT PARTS AND
ACCESSORIES
For original replacement parts and accessories, con-
tact your nearest Authorized Dealer or Authorized
Service Center for this product. If they can not sup-
ply the part or accessory, contact your nearest Parts
Central listed on page 67. Each Authorized Dealer,
Authorized Service Center, and Parts Central is
independently owned and operated.
See pages 63 through 66 for an Illustrated Parts List.
If you need additional referral information, contact our
Technical Service Department (see Technical Service).
In Canada call 1-800-561-3372 for parts information.
REPAIR SERVICE
Note: Only use original replacement parts. This will
protect your warranty coverage for parts replaced
under warranty.
Each Authorized Service Center is independently
owned and operated.
Warranty Service
If product requires warranty service, return it to nearest
Authorized Service Center. You must show proof of
purchase. If faulty materials or workmanship caused
damage, we will repair or replace product without
charge. Note: Normal wear, misuse, abuse, neglect, or
accidental damage is not covered under warranty.
Non-Warranty Service
If product requires service, return it to nearest Au-
thorized Service Center. Repairs will be billed to you
at regular repair list prices.
For additional Service Center or warranty informa-
tion, call 1-800-626-2237 or visit our Technical Ser-
vice web site at www.remingtonpowertools.com.
Replacement saw chains may be available at your
local hardware or home improvement store.
The following list gives the specifi cations for replace-
ment chains.
All chains will be .050 gauge, 3/8 pitch.
14" chains have 56 drive links
16" chains have 58 drive links
You may also order the replacement saw chains from
the "Online Outlet" at www.remingtonpowertools.
com using the part number listed in the illustrated
parts list on pages 63-66 of this manual.
REPLACEMENT CHAINS
We reserve the right to amend these specifi cations
at any time without notice. The only warranty ap-
plicable is our standard written warranty. We make
no other warranty expressed or implied.