Filter
Top Products
■ HOW TO INSTALL THE AIR INLET
SCREEN TO THE VOLUTE COVER
• Put the mark ▲▲ of the air inlet screen to the
mark ●● of the volute cover in line.
• Turn the air inlet screen clockwise (arrow
direction) and make sure it is firmly
installed.
• Install the screw through the stopper to
insure that the air inlet screen does not
move
Storage
BEFORE STORING THE BLOWER:
1.Drain a fuel tank and push the primer bulb
until it becomes empty of fuel.
2.Remove the spark plug and drop a
spoonful of 2-cycle oil into the cylider.
Crank the engine several time and install
the spark plug.
Maintenance
❲
13
❳
■ PROCEDURES TO BE PERFORMED
AFTER EVERY 100 HOURS OF USE
• Remove the muffler, insert a screwdriver
into the vent, and wipe away any carbon
buildup. Wipe away any carbon buildup on
the muffler exhaust vent and cylinder
exhaust port at the same time.
• Tighten all screws, bolts, and fittings.