RedMax EBZ8001 Snow Blower User Manual


 
16
Check to see if the shock-absorbing rubber mount has
become cracked or otherwise damaged. Note that
failing to replace this rubber mount when it has
become cracked or damaged may cause the engine
to come loose from its frame during use, thus
resulting in possible serious bodily injury.
If cracked, be sure to replace without delay.
To reduce the risk of injury associated with contacting
rotating parts, stop the engine before installing or
removing attachments. Do not operate without net in
place. Always disconnect the spark plug before
performing maintenance or accessing movable parts.
USING THE PRODUCT
1. Check the work area that the blower will be used in
and remove or cover all valuables that may be
damaged by the air blast or thrown debris.
2. To reduce the risk of injury associated with thrown
objects.
a) Watch out for children, pets, open windows or
freshly washed cars, and blow debris safely
away.
b) Use the full blower nozzle extension so the air
stream can work close to the ground.
c) Do not allow bystanders in work area.
d) Do not point the blower tube in the direction of
people or pets.
e) Always check to be sure that no debris has been
blown onto someone else’s property.
f) Pay attention to the direction of the wind, do not
work against the wind.
g) Never point a blower tube toward an open flame
to avoid the possibility of igniting the unit, causing
injury to yourself or damage to surroundings.
3. To minimize blowing time.
a) Use rakes and brooms to loosen debris before
blowing.
b) In dusty conditions, slightly dampen surfaces or
use mister attachment when water is available.
WARNING
WARNING
5. For safe operation
English