Filter
Top Products
■ SHOULDER STRAP
• If the shoulder strap is damaged it may
break during use, thus causing the product
to fall and resulting in personal injury.
Follow the instructions below to replace the
shoulder strap.
• Pass the top end of the strap through the
hanger, making the FLAPPED SIDE
OUTSIDE.
• Pull the end of the strap through the ring,
on the strap, and then push the ring
towards the hanger as close as possible.
Storage
BEFORE STORING THE BLOWER:
1.Drain a fuel tank and push the primer bulb
until it becomes empty of fuel.
2.Remove the spark plug and drop a
spoonful of 2-cycle oil into the cylider.
Crank the engine several time and replace
the plug.
❲
10
❳
Maintenance
• The flap on the end of the strap works
as a stopper. Never install the strap with
the flapped side inside, or the unit may
fall from the operator, which could
result in injury to the operator and/or
damage to the unit.
• Never use a blower which is not
properly repaired or remodeled.
NOTE
WARNING