Filter
Top Products
US-17
BCZ2450S/T
U
S
•When sharpening, removing, or reattaching the blade, be
sure to wear thick, sturdy gloves and use only proper tools
and equipment to prevent injury.
■ CHOOSE THE BLADE
Choose a suitable recommended cutting attachment according to
the object to be cut. (OPT4)
• When replacing blade always be sure to use products which
have been certified by RedMax.
(1) 9” 22-tooth : SST229
(2) 9” 24-tooth : SST249
(3) 8” 8-tooth : SGB088
(4) 9” 8-tooth : SGB089
(5) 8” 4-tooth : SGB048
(6) 9” 4-tooth : SGB049
(7) Nylon line head
(A) Under growth
(B) Heavy weeds
(C) Light weeds
(D) Grass
WARNING
■ SET UP THE BLADE
1. Detach the line head assembly. (OPT5)
2. Put on the blade, making the marked
side face the shaft side, put the holder
and the cover on, and fasten the blade
with the nut. (OPT5)
(1) Cover : 3540-13283
(2) Holder (B) : 6019-13250 (STANDARD)
(3) Nut : T3002-13260 (STANDARD)
■ BALANCE UNIT
1. Put on strap and attach unit to strap.
2. Slide clamp up or down until unit
balances with head just touching on the
ground. (OPT6)
OPT6
(1)
(3)
(2)
OPT5
12. Optional blade usage (for BCZ2450S only)
OPT1
OPT3
OPT2
• For security reason, in case of
mounting the blade on this product
and use it, purchase the blade kit
(T3195-94000) and change guard,
handle from the original ones, and
use shoulder strap.
(1) Shoulder strap : T3300-17100
Change to the debris guard which is
suitable for the metal blade. (OPT2)
TIGHTENING TORQUE :
130~174 in-lbs
(14.7~19.6 N.m.)
(1) Guard-A : 5764-24000
(2) Guard : 5766-24110
(3) Bracket : 3250-24120
(4) Bolt : 0225-10620
(5) Screw : 0263-30614
(6) Nut : 0280-10605
Change the loop handle to the J-handle
for safe operation. (OPT3)
(1) Bracket : 3583-14101
(2) J-handle : 6367-14200
IMPORTANT
IMPORTANT
WARNING
(1)
(2)
(3)
(4)
(5)
(6)
(7)
(A)
(B)
(C)
(D)
OPT4
[ BCZ2450T ]
This trimmer is designed for use as
a trimmer only.
Metal blades should never be used
on this trimmer.
WARNING