RedMax BCZ2401S-CA Brush Cutter User Manual


 
44
When sharpening, removing, or reattaching the
blade, be sure to wear thick, sturdy gloves and
use only proper tools and equipment to prevent
injury.
CHOOSE THE BLADE
Choose a suitable recommended cutting attachment
according to the object to be cut. (OPT5)
When replacing blade always be sure to use
products which have been certified by RedMax.
(1) 9” 22-tooth : SST229
(2) 9” 24-tooth : SST249
(3) 8” 8-tooth : SGB088
(4) 9” 8-tooth : SGB089
(5) 8” 4-tooth : SGB048
(6) 9” 4-tooth : SGB049
(7) Nylon line head
(A) Under growth
(B) Heavy weeds
(C) Light weeds
(D) Grass
WARNING
SET UP THE BLADE
1. Detach the line head assembly. (OPT6)
2. Put on the blade, making the marked side face the
shaft side, put the holder and the cover on, and
fasten the blade with the nut. (OPT6)
(1) Cover : 3540-13283
(2) Holder (B) : 6019-13250 (STANDARD)
(3) Nut : T3002-13260 (STANDARD)
BALANCE UNIT
1. Put on strap and attach unit to strap.
2. Slide clamp up or down until unit balances with head
just touching on the ground. (OPT7)
STARTING THE ENGINE
Please refer 5.For safe operation (P.12), 8.Operation
(P.26).
•The product is equipped with a centrifugal clutch
mechanism, so the cutting attachment could
rotate as soon as the engine is started. When
starting the engine, place the product onto the
WARNING
OPT7
(1)
(3)
(2)
OPT6
(1)
(2)
(3)
(4)
(5)
(6)
(7)
(A)
(B)
(C)
(D)
OPT5
12. Optional blade usage
English