Filter
Top Products
■ INSTALLING HANDLE
•Mount the handle to the shaft tube and clamp it
at a location that is comfortable to you. (SE1)
(1) About 19 inches (48cm)
■ INSTALLING DEBRIS GUARD
• Put the debris guard on the tube, attach it with
the 2 screws and clamp provided. (SE2)
■ INSTALLING CUTTING HEAD (SE3)
1. While locking the gear shaft, by inserting the
supplied tool into the upper holder on the gear
box, loosen and remove the hexagon nut(left-
handed)
2. Fit the line head assembly to the gear shaft over
the holders. Hand-tighten it securely.
Blades should not be used on this model
trimmer.
6. Set up
(1)
SE1
SE2
13
SE3