Filter
Top Products
16
A LOOK AT THE DISPLAY
The display has several indicators that show the scanner’s current operating mode.
A good look at the display will help you understand how your scanner operates.
MON
— appears during a search or
when you listen to a monitor memory.
The number to the right of this shows
the current monitor memory number.
See “Listening to Monitor Memories”
on Page 23.
FREQ, CHAN, LOCK
— shows the
rotary tuner’s current setting.
BANK
— shows which channel-
storage banks are turned on. See “Un-
derstanding Channel-Storage Banks”
on Page 17.
HYPER
— appears when you scan
channels or when the scanner is in the
Hypersearch mode during limit
search, direct search, and auto store.
AUTO
— appears when the scanner is
in the auto store mode or when the
auto sort function is turned on.
COUNT
— appears when you use the
scanner’s count feature.
CTCSS
—
appears when the CTCSS
feature is turned on.
DATA
— appears when you turn on
the data skip feature.
FM/AM
— shows the current modula-
tion mode; flashes when you override
the default mode.
P
— appears when you listen to a pri-
ority channel.
CH
— digits that precede this indicator
show which of the 200 channels the
scanner is tuned to.
ATT
— appears when the attenuator
is turned on.
MHz
— the large digits that precede
this indicator show which frequency
the scanner is tuned to.
SCAN
— appears when you scan
channels.
MAN
— appears when you manually
select a channel.
PGM
— appears while you program
frequencies into the scanner’s chan-
nels.
PRI
— appears when you set the
scanner to scan the selected priority
channels every 2 seconds.
20-418.fm Page 16 Wednesday, August 4, 1999 12:42 PM