Filter
Top Products
5
OPERATION
1. Hold the wind gauge
upright so you can see the
display. Lift it above your
head and hold it steady.
2. Press the sense button.
While the wind gauge
measures the current wind
conditions, the 12 wind
direction icons alternately
flash until the wind
direction is computed. The
wind speed is continuously
updated, and
HOLD blinks to
indicate measurement is
taking place. Ô
3. After about three seconds,
one of the wind direction
icons darkens to show the
current wind direction. It is
continuously updated
unless no valid data is
received for about three
seconds.
Ô NOTE Ô
• If the gauge
measures for more
than 90 seconds, or if
you hold down the
sensebuttonformore
than 90 seconds, all
direction icons blink
for about 10 seconds.
The last
measurement is
shown on the display
for a few seconds.
then the gauge turns
off.
• The LED backlight
turnsonwhenyou
press the sense
button, and turns off
after stopping the
measurement for 10
seconds.
63-1119.RC.fm Page 5 Tuesday, January 28, 2003 7:51 AM