Filter
Top Products
10
Preparation
Mounting the Thermometer
To set the ther-
mometer on a flat
surface, slide the
built-in stand away
from the back of
the unit, then pull
the stand up until it
snaps into place.
To mount the thermometer on a wall us-
ing the keyhole slot on the back of the
thermometer and the supplied screw, fol-
low these steps.
1. Use the supplied screw to drill a hole
in the wall at the desired mounting
location so the head extends about
1
/
4
inch (6.35 mm) from the wall.
63-1028.A.fm Page 10 Monday, October 9, 2000 9:07 AM