Filter
Top Products
Left Button
For numeric items, this button is used to select which digit in a numeric entry is
selected for editing. For other items, or when the left most digit is already selected
for numeric items, pressing and holding this button down displays a brief description
of the current item.
Right Button
For numeric items, this button is used to select which digit in a numeric entry is
selected for editing. For other items, or when the right most digit is already selected
for numeric items, press and hold this button down to display the range and units for
the current item.
Stop Button
Disables output of pulses on all channels.
Run Button
Enables output of pulses.
Output Sections
There are two (2) output sections on the front of the 9700; each consists of a pair of
banana plugs, a BNC current monitor, a toggle switch, and a charge level indicator.
Each output section is independently controlled and isolated from each other. Loads
are connected to the banana plugs. The toggle switch allows the user to physically
disconnect the output (off position). Disconnecting the outputs is recommended
while connecting loads.
Warning: The charge bank voltage is present on the positive (red) output jack;
before connecting loads, disconnect bank voltage by placing toggle switch in off
position.
6