Quadra-Fire 839-1460 Patio Heater User Manual


 
Page 40
January 28, 2008
Quadra-Fire · Sapphire · 250-7233F
D. After Appliance is Lit
When you light your appliance, you may notice that it pro-
duces heat which does have an associated odor or smell. If
you feel this odor is excessive it may require the initial three
to four hour continuous burn on high followed by a second
burn up to 12 hours to fully drive off any odor from paint and
lubricants used in the manufacturing process. Condensation
on the glass is normal.
NOTE: The appliance should be run three to four hours
on the initial start-up. Turn it off and let it cool completely.
Remove and clean the glass. Replace the glass and run the
appliance for an additional 12 hours. This will help to cure
the products used in the paint and logs.
During this break-in period it is recommended that some
windows in the house be opened for air circulation. This will
help avoid setting off smoke detectors, and help eliminate
any odors associated with the appliance’s initial burning.
Initial Break-in Procedure
E. Frequently Asked Questions
Fire Hazard.
Keep combustible materials, gasoline
and other ammable vapors and liquids
clear of appliance.
WARNING
Do NOT store ammable materials in the appliance’s
vicinity.
Do NOT use gasoline, lantern fuel, kerosene, charcoal
lighter uid or similar liquids in this appliance.
Combustible materials may ignite.
Smoke and odors released during initial operation.
Open windows for air circulation.
Leave room during initial operation.
Smoke may set off smoke detectors.
Smoke and odors may be irritating to sensitive individuals.
CAUTION
Prevent accidental appliance operation when not
attended.
Unplug or remove batteries from remote control if absent
or if appliance will not be used for an extended period of
time.
Property damage possible from elevated temperatures.
CAUTION
ISSUE SOLUTIONS
Condensation on the glass This is a result of gas combustion and temperature variations. As the appliance warms,
this condensation will disappear.
Blue ames This is a result of normal operation and the ames will begin to yellow as the appliance
is allowed to burn for 20 to 40 minutes.
Odor from appliance When rst operated, this appliance may release an odor for the rst several hours.
This is caused by the curing of the paint and the burning off of any oils remaining from
manufacturing. If appliance has not been used for some time, dust can build up and
cause an odor.
Film on the glass This is a normal result of the curing process of the paint and logs. Glass should be
cleaned within 3 to 4 hours of initial burning to remove deposits left by oils from the
manufacturing process. A non-abrasive cleaner such as gas appliance cleaner may be
necessary. See your dealer.
Metallic noise Noise is caused by metal expanding and contracting as it heats up and cools down,
similar to the sound produced by a furnace or heating duct. This noise does not affect
the operation or longevity of the appliance.
Fire Risk.
High Temperatures.
WARNING
Keep combustible household items away from appliance.
Do NOT obstruct combustion and ventilation air.
Do NOT place combustible items on top of or in front of
appliance.
Keep furniture, draperies away from appliance.