Powermate PM4025 Portable Generator User Manual


 
PM4025
Gaseous Fueled Stationary Standby
25kW
60Hz
Page 4 of 4
Alternator Data
Type Brushless Revolving Field, Drip Proof Construction
W/Tropicallized Windings
# Poles 4
Coupling Method Direct, Flex Disc
Insulation Class H, UL 1446 Recognized
Voltage Regulation
Externally Regulated, Solid State AVR ± 1.5%
Total Harmonic Distortion <3.5%
Waveform Deviation Factor <5%
Circuit Breaker Data
Type Molded Case
Withstand Rating 10kA AC @ 240v, 18kA @ 480v
Agency Listing UL 489 Listed
Control Panel Functions
Automatic Remote Start (2-wire) Generator Voltage Metering Generator Frequency Metering
Generator Current Metering Engine Coolant Temperature Metering Engine Coolant Temperature Protection
Engine Oil Pressure Monitoring Engine Oil Pressure Protection Overspeed Protection
Overcrank Protection Emergency Stop Input Engine Cooldown
Watt Metering VA Metering Engine RPM Metering
Power Factor Metering Watt-hour Metering Engine Run Time Metering
Battery Voltage Metering Battery Condition Monitoring Maintenance Interval Timer
On-Off-Auto Selector Switch Low Coolant Level Detection* Battery Charger Failure Monitoring*
Options
LP Liquid Withdrawal System
Remote Annunciation Panel – RDP110
Digital (CP1000) Panel Upgrade
Allows For:
Additional I/O Contacts
Modem Capability
Dimensions & Weight
Weight
1400 lbs.
All Specifications Subject to Change Without Notice
101-2931-0602
©2002 Coleman Powermate, Inc.
Coleman® is a registered trademark of the Coleman Company, Inc. used under license.
* Generator Set Must Be Equipped With Appropriate Hardware