Filter
Top Products
7
S Throw away and replace blades that are
bent,warped,cracked, broken ordamaged
in any other way .
S Install requiredshield properly beforeusing
the unit. Use the metal shield for all metal
blade use. Only use brushcutter
attachments that provide a metal shield
with proboscis nose.
Proboscis
nose
S Useonlyspecified bladeandmakesureitis
properly installed and securely fastened.
S Cut from your right to your left.
S Always use the handlebar and a properly
adjusted shoulder strap with blade (see
ASSEMBLY instructions in brushcutter
attachment instruction m anual).
CULTIVATOR SAFETY
WARNING: Rotating tines can cause
serious injury. Keep away from rotating tines.
Stop the engine and disconnect the spark plug
before unclogging tines or making repairs.
WARNING: Inspect the area to be
cultivatedbeforestartingthe unit. Removeall
debris and hard and sharp objects such as
rocks, vines, branches, rope, string, etc.
S Avoid heavy contact with solid objects that
might stop the tines. If heavy contact occurs,
stop the engine and inspect the unit f or
damage.
S Never operate the cultivator without the tine
co ver in place an d prope rly secu re d.
S Keep the tines and guard clear of debris.
S After striking a foreign object, stop the
engine, disconnect the spark plug and
inspect the cultivator for damage. Repair
before restarting.
S Disconnect attachment from the drive engine
before cleaning the tines with a hose and
water to remove any build--up. Oil the tines to
prevent rust.
S Always wear gloves when servicing or
cleaning the tines. The tines become very
sha rp fro m use.
S Do not run unit at high speed unless
cultivating.
HEDGE TRIMMER SAFETY
DANGER: RISK OF CUT; KEEP
HANDS A WAY FROM BLADE -- B la de mo ves
mome ntarily afte r the tri gge r is rele ased or en-
gine isturned off. Donotattemptto clearaway
cut material when the blade is in motion. Make
sure the switch is inthe OFF position, the spark
plug wire is disconnected, and the blade has
stopped moving before removing jammed ma-
terial from the cutting blade. Do not grab or hold
the unit by the cutting blade.
WARNING: Inspect t he area before
starting the unit. Remove all debris and hard
objects such as rocks, glass, wire, etc. that
can ricochet, be thrown, or otherwise cause
injury or damage during operation.
S Do not use a cutting blade that is bent,
warped, cracked, broken or damaged in any
other way . Have worn or damaged parts
replaced by an authorized service dealer.
S Always keep unit in front of your body.
Keep all parts of your body away from the
cutting blade.
S Keepthe cuttingbladeandairvents clearof
debris.
POLE PRUNER SAFETY
WARNING: The reciprocatingblade/
rotating chain can cause severe injury. In-
spect the unitbefore use. Donot operate unit
witha bent,crackedordullbladeor d ullchain.
Keep away from the blade/chain.
WARNING: The reciprocatingblade/
rotating chain is sharp. Do nottouch. Topre-
vent serious injury, always stop engine and
ensure blade/chain hasstopped moving, dis-
connect spark plug, and wear gloves when
changing or handling the blade or chain.
WARNING: A coasting blade/rotat-
ingchaincancauseinjurywhileitcontinuesto
move after the engine is stopped. Maintain
proper control of the unituntil t heblade/chain
has completely stopped moving. Keep
hands, face and feet at a distance from all
movingparts. Do notattempt totouch o rstop
the blade or chain when it is m oving.