Filter
Top Products
3
eye protection such as non-fogging, vented
goggles or face screen; an approved safety
hard hat; and sound barriers (ear plugs or
mufflers) to protect your hearing. Regular
users should have hearing checked r egular-
ly as chain saw noise can damage hearing.
Secure hair above shoulder length.
Snug
Fitting
Clothing
Safety
Shoes
Safety Chaps
Heavy Duty
Gloves
Eye
Protection
Hearing
Protection
Safety Hat
S Keep all par ts ofyour body away from the
chain when the engine is running.
S Keep children, bystanders, and animals a
minimumof30 f eet(10meters) awayfrom
the work area. Do not allow other people
or animals tobe near thechain saw when
starting or operating the chain saw.
S Do not handle or operate a chain saw
whenyouarefatigued,ill,orupset,orifyou
have taken alcohol, drugs, or medication.
You must be in good physical condition
and mentally alert. Chain saw work is
strenuous. If you have any condition that
might be aggravated by strenuous work,
check with your doctor before operating a
chain saw.
S Carefullyplanyoursawingoperationinad-
vance. Donotstartcuttinguntilyouhavea
clearworkarea,securefooting,and, ifyou
are felling trees, a planned retreat path.
OPERATE YOUR SAW SAFELY
S Donotoperateachainsawwith onehand.
Serious injuryto theoperator,helpers,by-
standers or anycombination oftheseper-
sons may result from one-handed opera-
tion. A chain saw is intended for
two-handed use.
S Operatethechainsawonly inawell-venti-
lated outdoor area.
S Do not operate saw from a ladder or in a
tree.
S Makesure thechain willnot ma kecontact
with any object while starting the engine.
Never try to start the saw when the guide
bar is in a cut.
S Do notput pressure onthesaw at theend
of the cut. Applying pressure can cause
you to lose control when the cut is com-
pleted.
S Stop the engine before setting the saw
down.
S Do not operate a chain saw that is dam-
aged, improperly adjusted, or not com-
pletely and securely assembled. Always
replace bar, chain, hand guard, or chain
brakeim mediatelyifitbecomes damaged,
broken or is otherwise removed.
S With the engine stopped, hand carry the
chain sawwith themuffleraway fromyour
body , and the guide bar and chain to the
rear, preferably covered with a scabbard.
MAINTAIN YOUR SAW IN GOOD
WORKING ORDER
S Haveallchainsawserviceperformed bya
qualifiedservice dealerwith theexception
ofthe i tem slistedin t hemaintenancesec-
tionofthismanual. Forexample,ifimprop-
ertools areusedtoremoveor holdthe fly-
wheelwhenservicingtheclutch,structural
damage to the flywheel can occur and
cause the flywheel to burst.
S Make certain the saw chain stops moving
when the throttle trigger is released. For
correction, refer to CARBURET OR AD-
JUSTMENTS.
S Never modify your saw in any way.
S Keepthehandles d ry,clean,andfree ofoil
or fuel mixture.
S Keep fuel and oil caps, screws, and fas-
teners securely tightened.
S Use only Poulan PRO accessories and
replacement parts as recommended.
HANDLE FUEL WITH CAUTION
S Do not smoke while handling fuel orwhile
operating the saw.
S Eliminate all sources of sparks or flame in
the areas where fuel is mixed or poured.
Thereshouldbenosmoking,openflames,
orworkthatcouldcausesparks. Allowen-
gine to cool before refueling.
S Mix and pour fuel in an outdoor area on
bare ground; store fuel in a cool, dry, well
ventilated place; and use an approved,
marked container for all fuel purposes.
Wipe up all fuel spills before starting saw .
S Move atleast 10feet (3meters) fromfuel-
ing site before starting engine.
S Turn the engine off and let saw cool in a
non-combustible area, not on dry leaves,
straw,paper, etc. Slowly remove fuel cap
and refuel unit.
S Storetheunitandfuelinanareawherefuel
vapors cannot reach sparks or open
flamesfrom waterheaters, electricmotors
or switches, furnaces, etc.
KICKBACK
WARNING: Avoid kickback which
can result in serious injury . Kickback is the
backward,upwardorsuddenforwardmotion
of the guide bar occurring when the saw
chainneartheuppertip oftheguidebarcon-
tacts any object such as a log or branch, or
when the wood closes in and pinches the
sawchaininthecut.Contactingaforeignob-
ject in the wood can also result in loss of
chain saw control.
S Rotational Kickbackcanoccurwhenthe
movingchaincontactsan objectattheup-
per tip of the guide bar. This contact can
cause the chain to dig into the object,
which stops the chain for an instant. The
result is a lightning fast, reverse reaction
which kicks the guide bar upand back to-
ward the operator.