Filter
Top Products
4
strength, change in skin color or texture, or
loss of feeling in the fingers, hands, or joints,
discontinue t heuse ofthis toolandseekmed-
ical attention. An anti-vibration system does
not guarantee the avoidance of these prob-
lems. Users who operate power tools on a
continual and regular basis must monitor
closely theirphysical conditionand thecondi-
tion of this tool.
SAVE THESE INSTRUCTIONS
ASSEMBLY
WARNING: If received assembled,
repeat allsteps toensure your unitis properly
assembled and all fasteners are secure.
Examine parts for damage. Do not use dam-
aged parts.
NOTE: If you need assistance or find parts
missing or damaged, call 1-800-554--6723.
This instruction manual has been developed
to help you assemble the unit and to provide
its safeoperation. Itis importantthat youread
the entire manual to become familiar with the
unit before you begin assembly.
Read your instruction manual.
Tools y ou will need:
S Adjustable wrench
S Hex wrench (provided)
TUBE ASSEMBLY
NOTE:
When performingthe following step,
besure thehandleis aligned asfollows: label
on top, throttle trigger to the opera tor’s right
hand side. The starter rope and the throttle
cable must not wrap around the tube.
Throttle trigger
Label
1. Assemble handle t u beto thelower tube (it
will be necessary to pullsome of the start-
er rope out of the housing).
2. Align the screw holes; insert the screws
through the aligned holes.
3. Thread one locknut onto each screw and
tighten securely.
Handle tube
Screws
Starter Rope
Locknuts
Lower
Tube
NOTE: When performing t hefollowingstep,
be sure the starter rope is not caught under
the cable clamp. The starter rope must hang
freely to operate properly.
4. Align the cable clamp between the tube
screws. Installthe cableclamp aroundthe
tube and throttle cable.
Throttle cable
Cable Clamp