Filter
Top Products
6
EDGING----yields precise, close cutting
around sidewalks, driveways, patios, etc.
EDGING
BEVELING----provides a wider cut or
trench around sidewalks, driveways,
patios, etc. Beveling removes more
material and therefore increases motor
load. Be careful to cut slowly to avoid
motor stalling or overload, which may
damage the motor.
BEVELING
OPERATING TIPS
S
Allow the blade to reach full speed
before placing the blade in the cut.
Be careful to cut slowly to avoid mo-
tor stalling or overload, which may
damage the motor.
S
Keep your edging path straight by
keeping the edge guide in contact with
the edge of the walkway.
S
Always work going away from people
and solid objects such as walls, large
stones, trees, automobiles, etc.
S
Be careful when edging near trees or
valuable plants. The high speed met-
al blade may cut roots and cause
damage to the plants.
S
Always keep blade area clean. Stop
the unit, make sure blade has com-
pletely stopped turning, and discon-
nect unit from the power source be-
fore cleaning.
S
If blade stalls, immediately raise the
blade from the cut by lowering the
handle. If blade continues to stall
when raised, stop the unit, discon-
nect the power source, and inspect
the blade area for blockage or dam-
age. Clean the blade area of debris.
MAINTENANCE
CUSTOMER RESPONSIBILITIES
Check for Loose fasteners and parts Before each use
Check for damaged or worn parts Before each use
Clean unit and labels After each use
CARE & MAINTENANCE TASK
WHEN TO PERFORM
CHECK FOR LOOSE
FASTENERS AND PARTS
S
Blade
S
Blade guard
S
Housing Screws
S
Handle Screws
S
Wheels
CHECK FOR DAMAGED OR
WORN PARTS
Refer replacement of damaged/worn
parts to an Authorized Service Dealer.
S
Trigger Switch -- Ensure trigger
switch functions properly by releas-
ing the switch. Make s ure motor
stops and blade stops turning; then
restart motor and continue.
S
Blade Guard -- Discontinue use of
unit if blade guard is damaged.
CLEAN UNIT & LABELS
S
Clean the unit using a damp cloth
with a mild detergent.
S
Wipe off unit with a clean dry cloth.