Filter
Top Products
10
Shoulder
Bolt
Gauge
Wheel
3/8 Washer
Ad just ing
Bar
Pin
Retainer
Spring
3/8-16 Center
Locknut
ASSEMBLE GAUGE WHEELS TO
MOWER DECK
The gauge wheels are designed to keep
the mower deck in proper position when
operating mower. Be sure they are prop-
erly adjusted to ensure optimum mower
performance.
1. Slide gauge wheel bar down into
bracket channel, Be sure that gauge
wheel bar aligning holes are on top.
As sem ble gauge wheels as shown
using shoulder bolts, 3/8 washers and
3/8-16 center locknuts and tighten
securely.
2. For ease of mower to tractor as sem bly,
raise gauge wheels to highest position
and retain with clevis pins and spring
retainers.
NOTE: Adjust gauge wheels before op er -
at ing mower. See “TO ADJUST GAUGE
WHEELS” in the Operation sec tion of this
manual.
TO ATTACH NOSE ROLLER
1. Assemble brackets "A" and "B" to the
inside of mower mounting brack ets as
shown. Tighten securely.
NOTE: Be sure bracket tabs are po si -
tioned in tab holes in mower brackets.
2. Position nose roller between brackets
and install rod and retainer spring.
02612
Nose Roller
Hex Bolt
"A" Bracket
"B"
Bracket
Lock
Nut
Tab
Hole
Retainer Spring
Rod