Filter
Top Products
25
KEY PART
NO. NO. DESCRIPTION
1 405783X479 Lever, Auger Control, RH
2 405999X479 Lever, Traction Drive Control, LH
4 178888 Bushing, Flange
5 169675 Retainer, Hairpin
6 17060408 Screw, Hex Head 1/4-20 x 3/4
7 178652 Rod, Interlock
8 196333X008 Arm, Impeller Rod
9 196334X008 Arm, Traction Rod
10 196619X479 Panel, Control
11 74780524 Screw, Hex Head 5/16-18 x 1-1/2
12 74780528 Screw, Hex Head 5/16-18 x 1-3/4
13 407856X479 Handle Tube, LH
14 407857X479 Handle Tube, RH
15 751153 Nut, Lock 5/16-18
16 19131316 Washer, Flat 3/8
17 178899 Knob, Handle
18 180480 Rod, Auger Control
19 180481 Rod, Traction Control
22 72120618 Bolt, Carriage 3/8-16 x 2-1/4
23 178643X479 Handle Tube, Lower
24 180447 Sleeve, Spring
25 180926 Spring, Traction Drive
26 178669 Spring, Auger Control
27 71210616 Screw, Hex Head 3/8-16 x 1
28 198559 Bushing, Pivot Lever
30 182906 Console, Panel
31 175262 Screw, Hex Head, Tapping #10-24 x 1-1/4
32 184471 Screw, Hex Head, Tapping #10-24 x 1/2
33 196335X008 Latch, Interlock
34 183518 Bolt, Shoulder
35 68038 Nut, Lock 1/4-20
36 178831 Spring, Torsion, Lever
37 193885 Spring, Interlock
38 178666 Headlight, Halogen (Includes Bulb)
- - 401620 Bulb, Halogen
39 178668 Bezel, Headlight
40 180964 Harness, Headlight (Halogen)
42 196336X008 Lever, Interlock
43 196337 Rod, Latch, Interlock
44 196338 Rod, Arm, Interlock
45 700279 Clip
46 57079 Washer, Friction
REPAIR PARTS SNOW THROWER - MODEL PP1130ES (96192001300)
HANDLES
NOTE: All component dimensions given in U.S. inches. 1 inch = 25.4 mm
IMPORTANT: Use only Original Equipment Manufacturer (O.E.M.) replacement parts.
Failure to do so could be hazardous, damage your unit and void your warranty.