Filter
Top Products
5
ASSEMBLY
WARNING: If received assembled,
repeatallstepstoensureyourunit isproperly
assembled and all fasteners are secure.
Examine parts for damage. Do not use dam-
aged parts.
NOTE: If you need assistance or find parts
missing or damaged, call 1-800-554-6723.
It is nor m al for the f uel filter to rattle in the
empty fuel tank.
Findingfuel oroil residueon muf flerisnormal
due t o carburetor adjustments and t esting
done by the manufacturer.
ADJUSTING THE HANDLE
WARNING: When adjusting t heassist
handle,besureitremains abovethe safetylabel
and below the mark or a rrow on the shaft.
1. Loosen wing nut on handle.
2. Rotate thehandle onthe shaftto anupright
position; retighten wing nut.
ATTACHING SHIELD
WARNING: The shield must be prop-
erly install ed.Theshieldprovides partialprotec-
tion from therisk ofthrown objects to theopera-
tor and others and is equippedwith aline l imiter
blade which cuts excess line to the proper
length. The l ine limiter bla de (on underside of
shield) is sharp and can cut you.
For proper orientation of shield, see KNOW
YOUR TR IMMER i llustratio n in OPERA TION
section .
1. Remove wing nut from shield.
2. Insert bracket into slot as shown.
3. Pivotshield untilboltpassesthroughholein
bracket.
4. Securely tighten wing nut onto bolt.
Slot
Shield
Wing
Nut
Bracket
Line Limiter
Blade
PIVOT