Filter
Top Products
5
OPERATION
KNOW YOUR EDGER ATTACHMENT
READ T HIS INS TRUCTION M ANUAL A ND SAFETYRULES BEFORE O PERA T ING YOUR E DG-
ER A TT ACHMENT. Compare the illustrations with your attachment to familiarize yourself with the
location of the various controls and adjustments. Save this manual for future reference.
Depth Adjustment Knob
Blade Shield
Gearbox
Wheel
Edger Blade
Shaft
Hanger
BLADE
The BLADE is designed to cut sod.
DEPTH ADJUSTMENT KNOB
The DEPTH ADJUSTMENT KNOB is used
to adjust the wheel for blade cutting depth.
OPERATING THE COUPLER
Your powerhead is equipped with a coupler
which enables optional attachments to be
installed. The optional attachments are:
MODEL:
Cultivator PPB2000T..................
Blower PPB3000B....................
Pruner PPB5000P....................
Brushcutter* PPB4000C...............
*not designed for use with electric powerheads
WARNING: Always disconnect pow -
erhead spark plug (or disconnect powerhead
frompowersource) beforeremoving orinstal-
ling a ttachments.
REMOVING ATTACHMENT
CAUTION:
When removing or installing at-
tachments, place the powerhead and attach-
ment on a flat surface for stability .
1. Loosen the coupler by turning the knob
counterclockwise.
Attachment
Coupler
Knob
LOOSEN
TIGHTEN
2. Press andhold the locking/release button.
Locking/Release
Button
Coupler
Upper Shaft
Attachment
3. While securely holding the upp er shaft,
pull the attachment straight out of the cou-
pler.
INSTALLING ATTACHMENT
1. Removetheshaftcapfrom theattachment
(if present) and discard.
2. Position locking/release button of attach-
ment into guiderecess of upper shaft cou-
pler.
3. Push the attachment into the coupler until
the locking/release button snaps into the
primary hole.
4. Before using the unit, tighten the knob se-
curely by turning clockwise.
Coupler
Primary Hole
Upper
Shaft
Locking/
Release
Button
Attachment
Guide Recess