Filter
Top Products
15
S Do not run engine at high speed while not
removing snow.
S Be attentive when using the snowthrower ,
and stay alert for holes in the terrain and o ther
hidden hazards.
S Make sure the rotor will spin freely before
attaching the snowthrower to the powerhead.
S Ifthe rotorwill notrotatefreely duetofrozen
ice, thaw the unit before thoroughly before
attempting to operate under power.
S Keep the rotor clear of debris.
S Do not throw snow near other people. The
snow thrower could propel small objects at
high speed causing injury .
S After striking a foreign object, stop the
engine, disconnect spark plug and inspect
the snowthrower f or damage and repair if
necessary before restarting unit.
S Never operate the snowthrower near glass
enclosures, automobiles and trucks.
S Never attempt to use thesnowthrower ona
roof.
S Never operate the snowthrower near
window wells, dropoffs, etc.
S Never discharge snow onto public roads or
near moving traffic.
S Clear snow from slopes by going up and
down; never across. Use caution when
changing directions. N ever clear snow
from steep slopes.
S Letsnowthrower runfor afew minutes after
clearing snow so moving parts do not
freeze.
S Look behind and use care when backing up.
Exercise caution to avoid slipping or falling,
especially when operating in reverse.
S Know how to stop quickly.
MAINTENANCE
WARNING: Disconnect the spark
plug before performing m aintenance except
for carburetor adjustments.
HELPFUL TIP
IMPORT ANT: Have all
repairs other than the rec-
ommended maintenance
described in the instruction
manual performed b y an
authorized service dealer.
If any dealer other than an authorized
service dealer performs work on the
product, Poulan PRO may not pay for
repairs under warranty. It is your re-
sponsibility to ma intain and perform
general maintenance.
CHECK FOR LOOSE
FASTENERS AND PARTS
S Spark Plug Boot
S Air Filter
S Housing Screws
S Assist Handle Screw
S Debris Shield
CHECK FOR DAMA GED OR
WORN PARTS
Contact an authorized service dealer for re-
placement of damaged or worn parts.
S ON/OFF Switch -- Ensure ON/OFF switch
functions properly by m oving the switch to
the OFF position. Make sure enginestops;
then restart engine and continue.
S Fuel Tank -- Discontinue use of unit if fuel
tank shows signs of damage or leaks.
S Debris Shield -- Discontinue use of unit if
debris shield is dam aged.
INSPECT AND CLEANUNIT ANDDE -
CALS
S After each use, inspect complete unit for
loose o rdamagedparts. Clean t h eunitand
decals using adampcloth witha milddeter-
gent.
S Wipe off unit with a clean dry cloth.
CLEAN AIR FILTER
A dirty air filter decreases engine perform-
ance and increases fuel consumption and
harmful emissions. Always clean after every
5 hours of operation.
1. Cleanthe cover and the area around it to
keep dirt from falling into the carburetor
chamber when the cover is removed.
2. Remove parts by pressing button t o re-
lease air filter cover.
NOTE: To avoid creating a fire hazard or
producing harmfulevaporative emissions, do
not clean filter in gasoline or other flammable
solvent.
3. Wash the filter in soap and water.
4. Allo w filter to dry.
5. Replace parts.
Air Filter
Air Filter
Cover
Button
INSPECT MUFFLER AND SPARK
ARRESTING SCREEN
WARNING: Themuffleron thisprod-
uct contains chemicals known to the State of
California to cause cancer.
As your unitis used, carbon deposits buildup
onthe muffler andspark arresting screenand
must be removed toavoid creating a firehaz-
ard or affecting engine performance.
For normal homeowner use, the muffler and
spark arresting screen will not require any
service. After 50 hours of use, we recom-
mend that your muf fler be serviced or re-
placed by an authorized service dealer.