Poulan 545123817 Chainsaw User Manual


 
8
TIGHTEN
5. Pushleveronbarknobdowntoreturnle-
ver to closed/locked position.
WARNING: Failuretopushleveron
bar knob down to closed/locked position
could result in serious personal injury or
damage to your chain saw .
6. Useascrewdrivertomove chainaround
guide bar.
7. If chain does not rotate, it is too tight.
Loosen bar knob 1 turn (counterclock-
wise); then, loosen chain by turning the
adjusting wheel
1
/
4
turn (upward direc-
tion). Retighten bar knob.
8. If chain is too loose, it willsag below the
guidebar.DONOToperatethesawifthe
chain is loose.
WARNING: If the saw is operated
with a loose chain, the chain could jump off
the guide bar and result in serious injury.
OPERAT ION
KNOW YOUR SAW
READ THIS INSTRUCTION M ANUAL AND SAFETY RULES BEFO RE OPERA TING YOUR
CHAIN SAW . Compare the illustrations with your unit to familiarize yourself with the location of the
various controls and adjustments. Save this manual for future reference.
Front Handle
Front Hand Guard
Chain
Bar Oil
Fill Cap
Starter Rope
ON/STOP
Switch
Starter Housing
Fuel Mix Fill Cap
Muffler
Bar Sprocket
Hole
Direction
of Chain
Travel
Guide Bar
Chain
Catcher
Clutch
Cover
Choke/Fast
Idle Lever
Throttle
Trigger
Rear
Handle
Cylinder Cover
Throttle
Lock--out
Chain Brake
Bar
Knob
Adjusting
Wheel