Filter
Top Products
TECHNICAL DATA
48
(1
The power rating of the engines
indicated is the average net power
output (at specified rpm) of a typical
production engine for the engine model
measured to SAE standard J1349/
ISO1585. Mass production engines
may differ from this value. Actual
power output for the engine installed
in the final machine will depend on
the operating speed, environmental
conditions and other variables.
(2
For engine specifications, refer to the
engine manufacturer's Owner Manual.
Engine
Manufacturer Briggs & Stratton
Type Intek
Power 16 hp
(1,2
Lubrication Pressure with oil filter
Fuel Min 86 octane unleaded (Max-
ethanol 5%, Max MTBE 15%)
Fuel tank capacity 3 gallons / 11.3 liters
Cooling Air cooled
Air filter Standard
Alternator 12V / 16A
Starter Electric 12V
Transmission
Transmission EZT Hydro Gear
Speed and direction controls Dual levers, foam gripped
Speed forward 7 mph / 11.3 km/h
Speed reverse 3.3 mph / 5.3 km/h
Brakes Mechanical parking brake
Front caster tires, smooth tread 410-5, 4 ply
Rear tires, turf pneumatic 18 x 6.5-8
Tire pressure 15 PSI / 103 kPa / 1 bar
Equipment
Cutting width 30"
Cutting height 1½" - 4" / 2.5 cm - 10.6 cm
Number of blades 2
Blade length 29½" / 75 cm
Sprung seat Standard
Hinged armrests No
Blade engagement Manual
Deck construction Stamped
Productivity
Output 1.6 acres/hr / 6475 m
2
/hr
Overall dimensions
Weight 395 lbs / 179 kg
Base machine length 66½" / 169 cm
Base machine width 39¼" 99.7 cm
Base machine height 33½" / 85 cm
Overall width, chute up 35½" / 90 cm
Overall width, chute down 37" / 94cm