Filter
Top Products
8
OPERAT ION
KNOW YOUR CHAIN SAW
READ THIS INSTRUCTION MANUAL AND SAFETY RULES BEFORE OPERATING YOUR
CHAIN SAW. Compare the illustrations with your unit to familiarize yourself with the location of
the various controls and adjustments. Save this manual for future r e ference.
Chain
Adjustment Tool
(Bar Tool)
Primer
Bulb
Fuel Mix Fill Cap
Starter
Housing
Bar Oil Fill Cap
Chain
Front Hand Guard
Front Handle
Starter Rope
ON/STOP
Switch
Muffler
Guide Bar
Chain Brake
Nuts
Cylinder Cover
Throttle
Lockout
Rear
Handle
Throttle
Trigger
Choke/
Fast Idle
Lever
Chain
Brake
Chain
Direction
of Travel
Adjusting
Screw
Chain
Catcher
Bar Sprocket Hole
ON/ST OP SWITCH
The ON/STOP SWITCH is used to sto p the
engine.
THROTTLE TRI GGE R
The THROTTLE TRIGGER controls engine
speed.
THROTTLE LOCK--OUT
The THROTTLE LOCK--OUT m ust be
pressed before you can squeeze the throttle
trigger. This feature prevents you from a cci-
dentally squeezing the trigger.
CHOKE/ FAST IDLE LEVE R
The choke and fast idle are set by pulling the
CHOKE/F AST IDLE LEVER out to th e full ex-
tent for cold starting or after refueling. The
choke provides additional fuel to the engine
during cold starting.
PRIMER BULB
The PRIMER BULB circulates fuel to the car-
buretor to provide quicker starting.
CHAIN BRAKE
The CHAIN BRAKE is a device designed to
stop the chain if kickback occurs. The chain
brake a ctivates automatically in the event of
kickback. The chain brake activates manually
if the f ront hand guard is pushed forward. The
chain brake is disengaged by pulling the front
hand guard back t oward the front handle as far
as possible.
CHAIN TENSION
It isnormal fora new chainto stretch during the
first 15 minutes of operation. Y ou should check
your chain tension frequently. See CHAIN
TENSION under the ASSEMBLY section.
WARNING: Muffler is very hot dur-
ingand a fteruse. Do nottouch t hemuffler or
allow combustible material such as dry
grass or fuel to do so.