Filter
Top Products
10- ENG
D25802
HOW TO USE WAND
Risk of injection or injury to person. Do not direct discharge
stream toward persons, unprotected skin, eyes, or with any
pets or animals. Serious injury can occur.
DO NOT attempt to change nozzles while pressure washer is
running. Turn engine off before changing nozzles.
Your pressure washer is equipped with four spray nozzles. Each is color coded
and delivers a specific spray pattern for a particular cleaning purpose. The size of
the nozzle determines the size of the fan spray and the pressure out of the
nozzle. The 0º, 15º, and 40º nozzles are high pressure nozzles. The chemical
nozzle is a low pressure nozzle.
The nozzles are housed in receptacles on the panel of the pressure washer
handle. Color squares on the panel identify nozzle location and spray pattern.
To change quick connect nozzles:
1. Pull quick connect coupler back and insert nozzle.
2. Release quick connect coupler and twist nozzle to make
sure it is secure in coupler.
Risk Of Injury. Ensure nozzle is completely
inserted in QC socket, and QC snap ring is
fully engaged (forward) before squeezing gun trigger.
0º nozzle - Red. This nozzle delivers a pinpoint stream
and is extremely powerful. It covers a very small area of
cleaning. This nozzle should only be used on surfaces
that can withstand this high pressure such as metal or
concrete. Do not use on wood.
15º nozzle - Yellow. This nozzle delivers a powerful 15
degree spray pattern for intense cleaning of small areas.
This nozzle should only be used on areas that can
withstand the high pressure from this nozzle.
40º nozzle - White. This nozzle delivers a 40 degree spray
pattern and a less powerful stream of water. It covers a wide
area of cleaning. This nozzle should be used for most general
cleaning jobs.
Chemical nozzle - Black. This nozzle is used to apply
chemicals or cleaning solutions. It has the least powerful
stream.