Filter
Top Products
13 — ENG D22885
SHUTTING DOWN
1. If you have siphoned chemicals, siphon a bucket
of clean water through the chemical hose. NOTE:
Failure to do so will cause damage to the pump.
2. Turn engine off. See Engine Owner’s Manual.
NOTE: NEVER turn the water off with the engine
running.
Never turn water supply
off while pressure wash-
er engine is running or damage to pump
will result.
3. Turn water source off.
4. Pull trigger on spray gun to relieve any water
pressure in hose or spray gun.
5. See Storage section in this manual for proper stor-
age procedures.
MAINTENANCE
WHEN PERFORMING MAINTENANCE, YOU MAY BE EXPOSED TO HOT SURFACES,
WATER PRESSURE, MOVING PARTS, OR FIRE RESULTING IN DEATH. BEFORE PER-
FORMING ANY MAINTENANCE OR REPAIR, DISCONNECT SPARK PLUG WIRE, LET ENGINE COOL AND
RELEASE ALL WATER PRESSURE. THE ENGINE CONTAINS FLAMMABLE FUEL. DO NOT SMOKE OR WORK
NEAR OPEN FLAMES WHILE PERFORMING MAINTENANCE.
ENGINE
1. Consult the Engine Owners Manual for the manu-
facturer's recommendations for any and all main-
tenance.
To ensure efficient operation and longer life of your pressure washer, a routine maintenance schedule should be
prepared and followed. If the pressure washer is used in unusual conditions, such as high-temperatures or dusty
conditions, more frequent maintenance checks will be required.
PUMP
1. Pump oil (checking and changing). Refer to the fol-
lowing illustrations to identify which pump is on
your pressure washer. Refer to the chart for oil
type, oil capacity, and maintenance schedule (if
applicable).
DAPC Axial Cam (PCH2425)
Cat (PCH3540HR)
DAPC Radial (PCV2021)
Annovi Reverberi (PCH3030, PCH2627)