Filter
Top Products
11- ENG
D28512
ASSEMBLE SKYHOOK
Tools needed:
1 - 1/2” socket or open end wrench
1 - Torque wrench
Parts bag contains:
1 - Skyhook
2 - Upper brackets
4 - Bolts, 5/16-18 x 7/8”
4 - Lockwashers, 5/16”
4 - Nuts, Whizlock 5/16”
1. Place skyhook under frame as
shown.
2. With skyhook resting on fuel
tank install upper bracket as
shown.
3. Wrap upper bracket around
frame.
4. Slide lockwashers onto bolts,
insert through brackets, and
secure with whizlock nuts.
NOTE: DO NOT tighten bolts at
this time.
5. Repeat steps 5-7 on other side.
6. Position skyhook between
arrows on label. When correctly
positioned skyhook will be
aligned to the center of the gen
head and engine as shown.
Failure to properly
position skyhook
can cause property damage,
serious injury or death, and void
the manufacturer’s warranty.