Filter
Top Products
Preparing for use
Charging
Charge the appliance for at least 10 hours before you use it for the rst
time and after a long period of disuse.
When the appliance is fully charged, it has a cordless operating time of up
to 60 minutes. Do not charge the appliance for more than 24 hours.
The appliance does not run from the mains when the battery is empty.
Make sure the appliance is switched off during charging.
1 Insert the appliance plug into the appliance (Fig. 3).
2 Put the adapter in the wall socket.
The charging light on the adapter goes on to indicate that the
appliance is charging (Fig. 4).
Note: The charging light does not change colour and does not go out when
the appliance is fully charged.
Optimising the lifetime of the rechargeable battery
Remove the adapter from the wall socket when the battery is fully
charged (which takes 10 hours).
Do not leave the appliance plugged into the wall socket for more
than 24 hours.
Discharge the battery completely twice a year by letting the motor
run until it stops. Then fully recharge the battery.
Attaching/detaching attachments
All attachments (epilating head (HP6375 only), precision trimmer
and micro shaver (HP6375/HP6373 only) can be attached and detached
in the same way.
1 To attach the attachment, push it onto the appliance (Fig. 5).
2 To detach the attachment, pull it off the appliance. (Fig. 6)
,
-
-
-
ENGLISH8