Filter
Top Products
P12
[How to charge]
It begins charging automatically when you set the battery packing in the charger which beams the
power supply lamp.
Leave just as it is until the charge is completed.
When the charge is completed, the charge lamp is turned off.
Detach the battery packing from the charger when the charge is completed.
Refreshing of battery
The use time shortens gradually by the phenomenon of Effect of the memory" when the NiMH
battery leaves capacity and repeats the charge. The voltage recovers after refreshing and the use
time returns normally in such a battery. Please refresh one degree every five times of the charge.
[Refreshing]
Set the battery in the charger as well as the case of the charge. Push the electrical discharge button.
The electrical discharge lamp lights and the electrical discharge begins.
The electrical discharge lamp is turned off when the electrical discharge ends, the charge lamp lights,
and the charge starts automatically. Leave just as it is until the charge is completed. When the
charge is completed, the charge lamp is turned off. Detach the battery from the charger.
[Time of refreshing and charge ]
Battery BP02 is discharged from the state of a full charge at about 960 minutes and the charge is
completed from the electrical discharge at about 130 minutes. However, the electrical discharge time
is proportional to the remainder capacity of the battery. Moreover, the time required for refreshing
might be different from the above-mentioned time according to a surrounding temperature and the
state of the battery.