Filter
Top Products
LEGEND® PLATINUM INSTALLATION MANUAL
3. Checking Wheel RPM
To determine whether the Legend
®
Platinum is
receiving the proper water pressure, turn off the
booster pump, pool pump and carefully remove the
Legend
®
Platinum from the pool.
Mark the front drive Tire/Wheel with a marker, or use
the Logo located on the side of tire as a marker to
count the rotations of the wheel per minute.
Have someone turn on pool pump and then booster
pump while you place the Legend
®
Platinum in
the pool just beneath the water surface. (Be sure to
hold onto the Sweep Hose to avoid getting wet).
Count the rotations of the marked wheel for exactly
one minute. (Be sure the Back-Up Valve isn't cycling
at this time). The rotations will give you the
Revolutions Per Minute, (RPM).
For proper performance, the Legend
®
Platinum
operates between 28-32 RPM. If the RPM is below
28 then call your local Pool Professional or contact
our Technical Support Department at 1-800-831-7133.
If the RPM is more than 32, at the Wall Fitting
unscrew the Pressure Valve slowly until the RPM
falls between 28-32.
If you have any additional questions, please
contact our Technical Support Department @
1-800-831-7133.
8