Filter
Top Products
Tools that may be required for installation:
(not furnished)
1. Pliers.
2. Wire ties (for securement).
B
A
Part illustrations:
A. Fold back hook (outside fastener).
B. Fingertip hook (inside fastener).
1 Lay chain straight
with the open sides of
the cross chain hooks
facing up. The open
sides of the cross chain
hooks must be facing
away from the tire
when the chain is
installed. Make sure all
twists are out of the
chain assembly.
Position the side chain with the
fingertip hook to go on the
inside of the tire (toward body of
the machine/vehicle). As a
result, the side chain with the
outside fastener will then be
positioned to go on the outside
of the tire.
cross
chain
hooks
fold back
hook
fingertip
hook
this side
facing
vehicle
2 Grasping the middle of the inside fastener side
chain, lift and drape the chain assembly over the tire,
making sure the open ends of the cross chain hooks are
facing away from the tire. Tuck the loose chain ends
under the tire, then move the machine/vehicle forward
slightly to be able to work with the fasteners.
3 Fasten the fingertip hook (inside fastener) by hooking
it to the second or third link of side chain.
Note: There is no designated Left or Right chain.
Either chain may be used for either tire.
1118-Tire Chains Instr.qxd 11/5/02 2:44 PM Page 2