Filter
Top Products
To get maximum wear and years of use
from your Peerless “MaxTrac” tire chains
follow these simple tips:
1 Avoid rapid acceleration: spinning tires cause
rapid wear on cross chains.
2 If the chains are installed properly they should be
snug with the cross chains at right angles to the side
chain. Adjust inside and outside fasteners so that
side chains are evenly tightened. The side chains
should be centered on the circumference of the tire.
www.peerlesschain.com
#9670785
Installation
Instructions for
Snowblower &
Lawn Garden Tractor
Tire Chains
4 Pull chain snug and connect the outside fastener to
its side chain the same number of links back from the end
as the inside connection. Fold fastener back and under
the side chain as pictured below. You will probably need
pliers to do it.
Once both fasteners are connected, chain assembly must
be snug on tire. Advance fasteners on each side chain
the same number of links until chain is sufficiently and
evenly tight on tire. See front cover picture for proper
chain fit. Remove or tie down all unused links once chain
is satisfactorily tight.
5 Repeat previous steps for other tire.
1118-Tire Chains Instr.qxd 11/5/02 2:44 PM Page 1