Filter
Top Products
151-071M 3/31/2004
Great Plains Mfg., Inc.
Seed Box Agitator Option
6
See
Figure 7
Idler Installation
18731
Figure 7:
6. Install two 12 tooth idler sprockets (10) in lo-
cations shown, using 1/2 x 3 1/2 inch bolts
(11), hex jam nuts (12), USS flat washers (13)
and hex flange nuts (14).
See
Figure 8
3P600 Chain Routing
18732
Figure 8:
7. Route chains as follows:
a. The 63 pitch chain around new 12 tooth
sprocket (15) on gearbox to 22 tooth
sprocket (16).
b. The 68 pitch chain around 17 tooth
sprocket (17) near left side of frame to 35
tooth sprocket (18) on agitator shaft.
8. Adjust idlers to remove chain slack.