Filter
Top Products
8
EN
Install the base station batteries (4 x UM-3 / AA)
matching the polarity + and -. Press RESET after each
battery change.
NOTE Do not use rechargeable batteries. It is
recommended that you use alkaline batteries with this
product for longer performance.
The battery icon indicator
may appear in the
following areas:
AREA MEANING
Weather
Forecast Area
Battery in the base station is low.
will show when AC adapter is
disconnected.
Temperature
/ Heat Index /
Wind Chill Area
The displayed channel indicates
the outdoor sensor for which
battery is low.
Wind Speed /
Wind Direction
Area
Battery in the wind sensor is low.
UVI / Barometer
/ Rainfall Area
Battery in the UV / Rain sensor
is low.
SET UP SENSOR
To set up sensor:
1. Slide battery door open.
2. Insert the batteries, matching the polarity (+ and -).
3. Use CODE to select the channel.
4. THGR810 only - Set the temperature unit.
5. Place the sensor near the main unit. Press RESET
on the sensor. Then, press the approriate main unit
WMR100TH_EN.indd 8 5/11/07 4:39:34 PM