Oregon Scientific BAR988HGA Weather Radio User Manual


 
EN
12
SWITCH OPTION
Channel If you are using more than one
sensor, select a different channel
for each sensor.
4. Press RESET. Then set the temperature unit.
SWITCH OPTION
Temp °C / °F
To fold out the stand:
1
2
For best results:
Insert the batteries and select the unit, channel, and
US time zone before you mount the sensor.
Place the sensor out of direct sunlight and moisture.
•Do not place the sensor more than 230 feet
(70 meters) from the main (indoor) unit.
Position the sensor so that it faces the main (indoor)
unit, minimizing obstructions such as doors, walls,
and furniture.
Place the sensor in a location with a clear view to
the sky, away from metallic or electronic objects.
Position the sensor close to the main unit during cold
winter months as below-freezing temperatures may
affect battery performance and signal transmission.
The RTGR328NA Sensor collects and transmits
temperature and humidity information, along with time
and date information. Time and date information is
obtained by synchronizing with radio broadcasted atomic
clock information from the National Institute of Time
located in Boulder Colorado. For more information on
the Atomic Clock, please visit www.nist.gov
SET UP THERMO / HYGRO SENSOR (RTGR328N)
1. Open the battery compartment with a small Phillips
screwdriver.
2. Insert the batteries.
3. Set the channel and radio signal format. The switches
are located in the battery compartment.
5. Press ZONE to select the US time zone (P for Pacific,
M for Mountain, C for Central or E for Eastern).
6. Close the battery compartment.
BAR988HGA English R5 9/18/04, 3:00 AM12