Oregon Scientific BAR388HG Weather Radio User Manual


 
7
EN
SET ALTITUDE
ALARM
BAROMETER
WEATHER FORECAST
This product forecasts the next 12 to 24 hours of
weather within a 30-50 km (19-31 mile) radius based
on barometric pressure trend readings.
ICON DESCRIPTION
Clear
Cloudy
Rainy
Partially Cloudy
To set the alarm:
1. Press and hold ALARM for 2 seconds.
2. Press / to set hour / minute.
3. Press ALARM to conrm. indicates alarm is ON.
To enable / disable the alarm:
1. Press ALARM to display alarm time.
2. Press ALARM again to turn alarm ON / OFF.
To silence the alarm:
Press SNOOZE to silence it for 8 minutes.
OR
Press any key except SNOOZE to turn the alarm off
and activate it again after 24 hours.
To ensure barometric readings are reliable set the altitude
to reect distance from sea level at your position.
1. Press and hold PRESSURE for 2 seconds.
2. Use
and to set the altitude in 10 m (33 ft)
increments from -100 m (-328 ft) to 2500 m (8202
ft).
3. Press PRESSURE to conrm.
Barometer readings from the past 24 hours are stored by
the main unit and used to provide weather forecast.
To select barometer measurement unit:
Press PRESSURE to toggle between mb and inHg.
TEMPERATURE AND HUMIDITY
To toggle temperature unit:
Press °C / °F.
To view outdoor sensors temperature readings:
Press CHANNEL.
To auto-scan between sensors:
Press and hold CHANNEL for 2 seconds.
Each sensor’s data is displayed for 3 seconds.
NOTE The maximum operating altitude for the barometer
and weather forecast is 2500m (8202 ft).