Filter
Top Products
58- AND 59-SERIES SQUARE-GROUND CHAINS
FEATURES BENEFITS
FEATURES AND BENEFITS
CHAIN
• Square-ground chisel cutters, factory • Superior cutting speed and the ultimate in overall
ground with optimum angles peformance (nose-clear, nose-buried, and boring)
• Smooth, easy cutting, minimal feed force required,
minimizes operator fatigue
• Depth gauge is ramp-shaped, • Reduces roughness and kickback energies
and offset without affecting performance
• Clean-ground gullet • Maximum chip flow, helps prevent clogs from debris
• No out-of-the-box filing is needed
• Lubrilink
™
tie straps • Improved chain and bar lubrication
• More oil stays where it’s needed – on the chain
• The volume of oil required is reduced
• Long, high-strength cutter top plate • Long working life, durable, resists breakage
• Made from patented OCS-01 steel-alloy • Tougher than the steel on other chains, 20% tougher
material (U.S. patent no. 5,772,957) at room temperature, 125% tougher at minus 20° F
59CL F&B A107036 AA 0301
Safety/ANSI: 58CJ/CL and 59CJ/CK/CL are yellow-label chains with kickback-reducing
features. These chains do not meet the kickback requirements for low-kickback chains.
Recommended Use: Professional use by loggers and forest firefighters who prefer
large saws and square-ground .404”-pitch chain.
CHAIN PART CUTTER CUTTER KICKBACK-REDUCING
NUMBER PITCH GAUGE SEQUENCE TYPE FEATURES
58CJ .404” .058” Skip Square-ground Ramp-shaped
58CL .058” Standard
Chisel Depth Gauges
59CJ .063” Skip
59CK .063” Semi-skip
59CL .063” Standard
These new Oregon
®
.404”-pitch Super Guard
®
chains have been carefully developed to replace the
popular 52AJ/AK/AL family of square-ground chains. Users of our previous 52-series chains will find it
easy to make the switch. 58CJ/CL, and 59CJ/CK/CL all feature a fast-working new chisel cutter that
delivers performance superior to its predecessors in all cutting modes. The new cutter is mounted on
our proven unequal-pitch 59 chassis for superior performance and durability. These chains give
professional timber cutters who use square-ground .404”-pitch chains what they want: out-of-box
sharpness, the ultimate in performance, resistance to stretch, and consistency from chain to chain.
These chains feature ramped depth gauges to reduce kickback energies, and are recommended for
cutting clean wood with saws 4.0 cubic inches (65cc) and larger, and with bars 20" (50cm) and longer.
Because every
cut counts