Filter
Top Products
Page 2SKU 96909 For technical questions, please call 1-800-444-3353.
Save This Manual
You will need this manual for the safety warnings and precautions, assembly,
operating, inspection, maintenance and cleaning procedures, parts list and assembly
diagram. Keep your invoice with this manual. Write the invoice number on the inside
of the front cover. Write the product’s serial number in the back of the manual near the
assembly diagram, or write month and year of purchase if product has no number. Keep
this manual and invoice in a safe and dry place for future reference.
GENERAL SAFETY RULES
Keep your work area clean and well lit. Cluttered and dark areas invite
accidents.
Children should never be left unattended around the Mini Greenhouse or allowed
to play with it, as it poses a potential suffocation danger.
Do not force the unit to perform outside of it’s capabilities. Use the correct product
for your application. Do not use the Mini Greenhouse for a purpose for which it is
not intended.
Store idle products out of reach of children and other untrained persons. This item
can be dangerous in the hands of untrained users.
Maintain labels on the product. These carry important information. If unreadable
or missing, contact Harbor Freight Tools for a replacement.
Maintain a safe working environment. Make sure there is adequate surrounding
workspace.
Do not exceed the maximum shelf capacity of 20 Pounds. Exceeding maximum
shelf capacity can damage the Mini Greenhouse and create a safety hazard.
UNPACKING
When unpacking, check to make sure that the item is intact and undamaged. If any
parts are missing or broken, please call Harbor Freight Tools at the number shown on the
cover of this manual as soon as possible.
ASSEMBLY INSTRUCTIONS
Note: For additional information regarding the parts listed in the following pages, refer to
the Assembly Diagram at the end of the manual.
Insert 3 Horizontal Rods (B) into the Connectors (A) and place the Shelf on top of
the Horizontal Rods. Please note: shelves should be installed so that wire web
and rivets are facing up.
1.
2.
3.
4.
5.
6.
7.
1.