Filter
Top Products
9
nozzles
grommets
gun hooks
flange
nuts
hose hook
handle
t-handle
knob
Hook Detail
flange nut
carriage bolt
Assembly Instructions
III.) Handle Assembly
1.) Attach handle to base with two carriage bolts and t-handle knobs.
2.) Spin a flange nut backwards onto the hose hook and each gun hook. (see hook detail)
3.) Mount the hose hook and gun hooks onto the handle as shown.
4.) Make sure the top gun hook points back and the bottom gun hook points forward.
5.) Insert grommets into the holes on the handle nameplate.
6.) Press nozzles into grommets according to the colors indicated on the handle decal.