Filter
Top Products
15
Oil fill tube
Maintenance
Engine Oil Change
1.) Place a suitable container on the ground
to catch the used oil, then remove the
engine oil fill cap.
2.) Tip the pressure washer on its side to
pour the used oil out through the
engine’s oil fill tube.
3.) Please dispose of used oil in a manner
that is compatible with the environment.
We suggest you take used oil in a
sealed container to your local recycling
center or service station for reclamation.
Do not throw it in the trash, pour it on the
ground, or dump it down the drain.
4.) With the pressure washer in a level
position, add oil to the engine. (see
engine owner’s manual for type of oil
and capacity)
Storage
Long Term Storage
Follow the engine owner’s manual for storing the
engine.
Winter Storage
Protect your pump, hose, and gun from freezing.
Items needed: 12” piece of garden hose or equivalent,
funnel and RV antifreeze (approximately 6 oz.)
1.) Follow the storage instructions listed above.
2.) Disconnect spark plug cable. Make sure the engine
throttle lever is in the “stop” position.
3.) Attach the garden hose with funnel to the water
inlet (see illustration).
4.) Pour RV antifreeze into the funnel; pull the engine
recoil until antifreeze comes out of the water outlet.
5.) Drain all water from the pressure hose. Depress
trigger on spray gun to drain all water out of the
spray gun/lance.
R
V
antifreeze
Funnel
Hose
Water inlet